ABS Plastic Toilet Flush Lever / Tank Flush Lever For Flapper Flush
Front mounted toilet lever is a classical model compatible with
many single flush toilets. Normally it's installed at the left
front of the toilet tank body when you face the toilet. The handle
is made of high quality solid brass and treated with anti-corrosion
chrome plating for long endurance. In most cases, the front toilet
lever works with a flapper flush valve and attaches with the pull
|Net weight:||45g +/-2%|
|Hole size:||18*18mm (L/W)|
|Moving range:||30 degree|
|Handle size:||50*25*38mm (L/W/H)|
|Application:||Flapper flush valve|
- Made from premium ABS raw material.
- Stylish and user-friendly design.
- Plastic lever with 3 anchor holes.
- Suitable to be mounted on front of tank.
- High glossy finish.
- Easy to install.
- Three layers high gloss plating, meeting 8H neutral salt spray
- Suitable for plastic and ceramic toilet cisterns with a square hole
dia.18*18mm in the front of cistern body,(Plastic cistern may need
an extra washer to compensate for smaller thickness.)
- Easy access for maintenance.
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.
We have strict quality control process and accept no compromise on
quality. This is the guidelines executed and abided in our company.
As an experienced manufacturers, we attach importance to the
critical parts of each model and pay special attention to material
source and approval testing. All staff in QC team is well trained
before they take up the jobs. Training course of updated standards
and customers’ special requirements is scheduled at irregular
intervals. Meanwhile, advanced testing equipments and devices are
introduced to our production line and laboratory to ensure accurate
and efficient feedback control.