Wall Hung PP Plastic Toilet Cistern Low Level For Toilet Pan /
Toilet cistern T002B is featured in elegant design and molded from
heavy duty strong polypropylene material. The cistern is fitted
with water saving dual flush mechanisms with WRAS approval and a
round dual push button of dia. 38mm. Generally speaking, the wall
hung toilet cistern is categorized into low level tank for toilet
pan or squat. Full set of flush pipes and other installation
accessories are included.
|Net weight:||2550g +/-3%|
|Dimension:||355mm * 360mm * 105mm (L/W/H)|
|Thickness:||5mm / 4mm / 3mm|
|Flush volume:||3/6LPF, 8L max.|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Noise level:||<=50 DB|
|Flushing rate:||>=2.3 Liters per seconds|
|Push button size:||Dia. 38mm|
|Push button installation:||Top mounted|
|Endurance:||200,000 times of filling and flush|
- Made from strong high quality plastic material complied with ROHS.
- Durable molded with a high-gloss finish.
- Water saving.
- Top mounted push button operation.
- Flush pipe set and other installation parts included.
- Silent filling, acoustic comfort.
- Speedy refilling flow (4.5L/min).
- Anti-siphon structure, no back flow.
- Powerful rinsing flow(2.3L/s).
- Top access for maintenance.
Internal Cistern Mechanisms:
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.