Universal Toilet Cistern Fittings For Dual Flush Plastic Cistern /
This set of toilet cistern fittings includes an adjustable bottom
fill valve and a canister type dual flush valve. The working
pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally
it can match toilet tank height from 280mm to 360mm. And you can
further extend the range if you choose a longer pushing rod for the
push button. It is an economic choice for sanitary ware factory who
need to find fittings for their two pieces or one piece WC.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||620g +/-3%|
|Fill valve installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Flush valve installation height:||240mm (from the upper rim of gasket to the top)|
|Outlet size:||2" for 2-pc toilet|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Float adjustment range:||no less than 70mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||90 degree|
|Connecting bolts:||M10*100mm (D/L)|
|Endurance:||200,000 times of filling and flush|
- Water saving.
- Heavy duty design.
- Adjustable telescopic pipe every 5mm.
- Anti-siphon structure, no back flow.
- Silicone rubber ensure water tightness and leakage free.
- Three layers high gloss plating, meeting 8H neutral salt spray
- Stylish chrome plated flush button, available in different
- Powerful rinsing flow(2.3L/s).
- Easy access for maintenance.
- Long endurance, 5 years warranty.