White Toilet Cistern Fill Valve Bottom Entry , American Standard
Toilet Fill Valve
Toilet cistern fill valve J0301 could be adjusted from 9” to 13”,
fit most of the toilet brand in American market. The inlet shank
size is available in G1/2” and G15/16”. It shuts off by needle pin
and could endure high pressure up to 2.5Mpa, suitable for area with
high pressure water pressure. Meanwhile this toilet fill valve is
the only model with integrated float system in our range, which
allow end users to adjust the float height in one step. The package
is available in plain polybag, printed PE bag, color box, window
box and blister packing.
|Material:||ABS, POM, rubber|
|Net weight:||220g +/-3%|
|Installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Inlet size:||1/2" BSP plastic|
|Useful length of inlet shank:||37mm|
|Working pressure:||0.02Mpa-2.5Mpa (2.9 psi - 350 psi)|
|Filling rate:||4.5L/min at 0.5Mpa|
|Noise level:||<=50 DB|
|Working water level:||110mm to 270mm|
|Float adjustment range:||no less than 70mm|
|Critical level:||35mm to the top|
|Float:||Two piece design|
|Width from top:||103mm|
|Endurance:||200,000 times of filling|
- Molded from premium plastic raw material.
- Comply with American Standard.
- Meet high pressure up to 2.5Mpa.
- Integrated float system for easy water level adjustment.
- Adjustable telescopic pipe every 5mm.
- Quiet filling, low noise.
- Anti backflow design to protect water line hygiene.
- Instant shut-off after finish toilet tank filling.
- Stable performance, no splash.
- 100% tested before shipment.