ABS Dual Inlet Shanks Toilet Fill Valve Kit For Bottom / Side Fill
Quiet to refill:
As a new toilet fill valve, J0701 is not only a two way toilet fill
valve kit, but also a quiet inlet valve. The noise level is 10 dB
lower than requirement of industry standard. Many old toilets
trouble the end user with big noise under working. That is really
annoying especially at late night. Our quiet fill valve is a good
solution. Just replace the old inlet valve with our new toilet fill
valve kit, and the night is more peaceful and quiet.
|Material:||ABS, POM, rubber|
|Net weight:||225g +/-3%|
|Shank size:||3/8" BSP brass|
|Installation:||Side or Bottom|
|Float adjustment range:||no less than 50mm|
|Critical level:||25mm to the top|
|Working pressure:||0.02Mpa-2.0Mpa (2.9 psi - 290 psi)|
|Installation height:||220mm to 328mm (8.5"-13") for bottom|
|Working water level:||110mm to 270mm for bottom, 35mm to 85mm below the inlet axis for
|Width from top:||150mm|
|Noise level:||<=50 DB|
|Filling rate:||4.5L/min at 0.5Mpa|
|Endurance:||200,000 times of filling|
- Injection molded from premium raw material.
- Universal toilet fill valve with changeable inlet shank.
- 100% tested before shipment.
- Long delay fill duration for saving water.
- Wide adjustment range to fit most toilet tank.
- Adjustable telescopic pipe every 5mm.
- Silent filling, acoustic comfort.
- Instant close after water reaches working level.