3 Inch Push Button One Piece Toilet Flush Valve Replacement Heavy
- Molded from premium ABS plastic raw material.
- Heavy duty design.
- Powerful rinsing flow(2.7L/s).
- Fully adjustable flush volume.
- Leakage free silicone rubber flapper.
- Overflow pipe height customized per order.
- Soft hand feeling, less than 20N.
- 360 degree body rotation for easy adjustment.
- Endurable solid stainless steel U-shape hook.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||370g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Outlet size:||3" for 1-pc toilet|
|Flushing rate:||>=2.7 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||35 - 65 mm for full flush, 70 - 120 mm for partial flush|
|Overflow pipe:||Fixed height customized per requirements|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
3 inch one piece toilet flush valve P0707A is designed for 1-pc W.C. with three inches discharge hole.
The flush volume could be adjusted in large scale and micro scale.
The bottom base is fitted with solid U-shape hook and fixing
bracket. This structure allows more powerful rinse flow and speedy
flush compared to the traditional tripod plastic base. The latter
one has problem of reducing flush rate and is more vulnerable to
the tightening force during installation. The new base for one
piece toilet is proved to be an effective solution to this problem.