Toilet Inlet Valve For Sanitary Ware Internal Mechanisms
- Molded from ABS and POM raw material.
- Compact float design to match small and big tank.
- Adjustable height from 220mm to 328mm.
- Speedy refilling flow.
- Delay fill for water conservation.
- Suitable for plastic and ceramic toilet cisterns.
- Endurable shut-off seal.
- 100% tested before shipment.
- 200,000 times of work life.
Toilet inlet valve J0601 is an universal bottom entry toilet
filling valve with compact float design. This size of the outer
float housing is only 60*50mm (L/W). It's the smallest float in our
range of toilet fill valve. While the operation pressure is
0.02Mpa-1.6Mpa. Normally the smaller the float is, the lower the
operation pressure is. Now with our toilet fill valve J0601, you
got a compact fill valve for your small tank and no need to worry
about leakage under high pressure.
|Material:||ABS, POM, rubber|
|Net weight:||220g +/-3%|
|Installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Shank size:||G1/2" POM|
|Float:||2-pc float, compact design|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Critical level:||35mm to the top|
|Float adjustment range:||no less than 70mm|
|Working water level:||110mm to 270mm|
|Water entry direction||Vertical|
|Width from top:||103mm|
|Noise level:||<=50 DB|
|Filling rate:||4.5L/min at 0.5Mpa|
|Endurance:||200,000 times of filling|