Toilet Cistern Valve With Dual Flush Valve And Side / Bottom Entry
- 2 in 1 fill valve for side and bottom entry.
- Both 1/2" BSP and 3/8" BSP is available.
- Wide pressure range 0.2bar - 20bar.
- Delay fill for water saving.
- Quick and quiet to refill the tank.
- Double action flush valve.
- High glossy chrome plated push button.
- Soft hand feeling, less than 20N.
- Piece by piece inspection before shipment.
Toilet cistern valve J0701+P0709BK includes a smart duo fill valve
and a double action flush valve 210mm. This complete set of toilet
tank fittings is a good option for 2-pc toilet cisterns from 240mm
to 320mm. No matter the toilet is with a side entry hole or a
bottom entry hole, this set is workable as the inlet shanks could
be swapped between side and bottom installation. Additionally, the
inlet shanks is available in four regular options: G1/2" plastic,
G1/2" brass, G3/8" plastic and G3/8" brass. Distributors or
wholesalers could have different percentage of each option
according to local market trends.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||580g +/-3%|
|Fill valve installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Flush valve installation height:||210mm (from the upper rim of gasket to the top)|
|Inlet size:||3/8“ BSP|
|Outlet size:||2" for 2-pc toilet|
|Working pressure:||0.02Mpa-2.0Mpa (2.9 psi - 290 psi)|
|Working water level:||110mm to 270mm for bottom, 35mm to 85mm below the inlet axis for
|Filling rate:||4.5L/min at 0.5Mpa|
|Critical level:||25mm to the top|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush valve body rotation:||90 degree|
|Push button:||Dia. 38mm, top mounted|
|Endurance:||200,000 times of filling and flush|