Push Button Toilet Cistern Fittings With Fill Valve And Flush Valve
Push button toilet cistern fittings J0601+P0709A is a complete set
of toilet fill and flush system for one piece W.C. It includes an
adjustable bottom fill valve, a dual flush valve for 1-pc toilet
and a dual flush button dia. 58mm. It can match toilet cistern from
240mm to 320mm. The duo flush valve is designed with an upgraded
float system. The partial flush adjustment float is fitted with a
float lock. It helps to keep the partial float at the preset level
and maintain stable flush volume. Without this device, the float
may move up or down slightly especially when the water pressure is
high or flush power is big.
- Water conservation design.
- Delay fill option.
- Fit one piece toilet.
- Easy to install and adjust.
- Wide water level adjustment range.
- Quick and quiet filling.
- Water tight silicone rubber seal.
- Overflow pipe cut per order.
- 100% tested before packing.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||630g +/-3%|
|Fill valve installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Flush valve installation height:||200 mm (from the upper rim of gasket to the top)|
|Inlet size:||G1/2" plastic|
|Outlet size:||2" for 1-pc toilet|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Filling rate:||4.5L/min at 0.5Mpa|
|Toilet cistern height:||240mm - 320mm|
|Critical level:||35mm to the top|
|Flushing rate:||>=2.3 Liters per seconds|
|Body rotation:||360 degree|