Three Inch Toilet Dual Flush Valve Discharge Device For 1- Pc And
Three inch dual flush discharge device for 1-pc and 2-pc toilet
This dual flush valve is designed for toilets with a 3 inches
discharge hole. This model is mainly used in America and compatible
with most brands of 3 inches toilet in the market. With bigger
discharge size, it can create much more powerful flush compared to
standard 2 inches outlet flush valve. Normally the flush volume of
a 2 inches dual flush valve toilet could be adjusted to 3/6LPF. For
a 3 inches dual flush valve, it can be further reduced to
2.5/4.5LPF and keep the same or even better rinsing effect.
|Net weight:||370g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Discharge size:||Three inch|
|Operation:||Manual flush, auto close|
|Body rotation:||360 degree|
|Flushing rate:||>=2.7 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||35 - 65 mm for full flush, 70 - 120 mm for partial flush|
|Overflow pipe:||Fixed height customized per requirements|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
- Molded from strong high quality plastic material complied with
- Water saving.
- Heavy duty design.
- Easy to install, totally tool free.
- Silicone flapper ensure water tightness and leakage free.
- Overflow pipe height customized per order.
- Powerful rinsing flow(2.7L/s).
- 360 degree rotation for easy adjustment.
- Soft hand feeling, less than 20N.
- Long endurance, 5 years warranty.
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.