Adjustable dual flush toilet mechanisms for one piece ceramic
This set of dual flush toilet mechanisms includes an adjustable
bottom fill valve and a canister type dual flush valve for 1-pc WC.
The working pressure range is very wide, between 0.02Mpa and
1.6Mpa. Normally it can match toilet cistern height from 240mm to
320mm. And you can further extend the range if you choose a longer
pushing rod for the push button. It is an economic choice for
sanitary ware factory producing one piece WC. Besides, delay fill
option is offered as a plus to save more water and make the flush
volume more stable.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||600g +/-3%|
|Fill valve installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Flush valve installation height:||200mm (from the upper rim of gasket to the top)|
|Outlet size:||2" for 1-pc WC|
|Filling direction:||Bottom entry|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Noise level:||<=50 DB|
|Critical level:||35mm to the top|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Dia. of push button:||38mm|
- Heavy duty design.
- Wide water level adjustment range.
- Water saving.
- With delay fill option.
- Adjustable telescopic pipe every 5mm.
- Silent filling, acoustic comfort.
- Steady refilling, no splash.
- Anti-siphon structure, no back flow.
- Three layers high gloss plating, meeting 8H neutral salt spray
- Classical chrome plated flush button in dia. 38mm.
- Long endurance, 5 years warranty.
We provide free samples for trial and evaluation. When you request
samples, please consider following factors to advance the process:
- How many sets of samples do you need?
- Do you need re-fill tube for the fill valve / inlet valve?
- Adjustable or fixed overflow pipe, which do you prefer? If you
choose fixed one, please advise the height if you have detailed
- The bottom screw of the flush valve is 30mm by length normally. If
you have special requirements, please specify.
- The diameter of the button is 38mm. If you need a different size,
please do mention it.
- The length of the pushing rod is 80mm per our standard. But you can
have a customized length.
If you want to have your own logo on the dual flush mechanisms, you
can choose from laser etching, silk printing, adhesive label or
Push button is the only part exposed to end user. It’s the best
place to show your logo or brand name. The finish of the dual flush
push button are chrome plated. Therefore, laser etching is the best
match for this kind of silver finish surface. But please noted, the
color of laser etching is not customized.
If you’re selling the dual flush mechanisms to DIY markets and need
to display the fittings on shelves, you may need to have the logo
printed on the fill valve and / or flush valve, not only on the
push button. You can consider to use silk printing, especially when
you want to use more than one color.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose label for dual flush mechanisms.
It’s 4 C color printed adhesive label in any pattern and size you
need. Its disadvantage is also easy to see, it could not be long
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the dual flush mechanisms. But the MOQ
will be higher than other ways as it needs to make some revision on
the existing molds. Please remember not every position of the
product could be carved with your logo. Only some positions is
applicable. Please check with our sales team and get further help.